Frontpage » Poles » X-Country Poles » Start FHF30

Start FHF30

Functional Ultra high fluor klister, purple


New Start FHF line is a functional fluorinated kick wax line. Suitable for use as kick wax alone, or as a finishing wax applied on top of kick waxing.

2°...-5°C (36°...23°F)

Waxing info

Waxing with klisters

Clean the grip zone with ski wax remover liquid. When using klisters, the grip zone is generally shorter than when using hard waxes (30 – 50cm). 

2. Abrade the grip zone with 80 – 120 grit sandpaper. 

3. Warm the klister in it’s tube with a hot air gun, hairdryer or hot water. Warm klister is softer and easier to apply in an even layer. 

4. Squeeze klister onto the grip zone, on both sides of the groove approximately every 5 centimetres. 

5. Spread the klister with your thumb, hand or with a cork to an even layer. 

6. Clean any excess klister from the groove and sidewalls of the ski. 

7. Allow the skis to cool outside before skiing. 

Note! Finished klister waxing should not be touched with your hands. 

Start FHF30

Related products

  • Start Race Ultra
  • Start Race
  • Start Race Jr
  • Start Winner
  • Start Winner Jr