Start

Luistovoitelu

Harrastelijan voitelu

Kelivoitelu: Start RG Race marathon glider (+5...-15C)

Apply Start RG race marathon glider onto the glide zones with iron. Let cool, scrape, brush and polish well

Kilpahiihtäjän voitelu

Alusvoitelu: Start RG Race molybden Glider (+5...-15C)

Kelivoitelu: Start RG Ultra Purple glider (-2...-8C)

Pintavoitelu: Start Boost Warm finishing powder

Apply Start RG race molybden glider with iron onto the glide zones. Let cool, scrape, brush and polish well.

Apply Start RG Ultra gllider onto the glide zones, scrape, brush and polish very well! All extra wax must be off!

Spread small amount of Start Boost Warm ppowder onto the base, make thin layer with cloth or finger. Rub slightly with natural cork to fasten

powder particles with wax abrorbed into the base. Brush with natural hair brush, then nylon brush and finally nylon finihing brush.

What thinnner layer you have on the base, that better it glides.

Pitovoitelu

Harrastelijan voitelu

Alusvoitelu: Start Grip Tape original +5...-20C

Apply Start Grip tape original onto the clean kick wax zone. Press well to fasten Grip tape. peel off the protecting paper. let cool before skiing at least 15 minutes outside

Kilpahiihtäjän voitelu

Alusvoitelu: Start base klister

Kelivoitelu: Start Special klister and Start Universal Plus klister 30/70 shares ( +2...-2, +10...+1C)

Pintavoitelu: Start FHF30 klister (+10...0C)

Apply thin layer of base klister onto the kick zone. Apply Special klister and Universal Plus klister in shares 30/70 onto the klick zone. make even with thub or cork. Use iron or hot air gun if needed. Let cool. Apply some drops of FHF30 klister on the to of cooled kick waxin. make even with synthetic cork. Let ski cool outside 15 minutes before skiing.