Start

Luistovoitelu

Harrastelijan voitelu

Alusvoitelu: Start SG Blue -2...-8C Glider

Kelivoitelu: Start RG Race Red+10...-2C fluor free glider

Apply Start Blue glider onto the glide zones with iron. let cool, scrape and brush well

Kilpahiihtäjän voitelu

Alusvoitelu: Start RG Race Green -10...-25C Glider

Kelivoitelu: Start RG Ultra Purple -2...-8C glider

Pintavoitelu: Start RG Boost Warm +10...-2C finisher powder or liquid

Apply Start RG Race Green glider with iron onto the glide zones. let cool, scrape nad brush well.

Apply Start RG Ultra Purple glider onto the glide zones with iron. Scrape brush and polish well.

Apply thin even layer of RG Boost finisher powder or liquid onto the glide waxing. Fasten with natural cork by light hand.

Brsuh with natural hair brush well. Polish with finishing nylon and fiber carefully. The thinner layer taht better glide!

Pitovoitelu

Harrastelijan voitelu

Alusvoitelu: Start Grip Tape Original +5...-20C

Spply Start Grip tape onto kick zone 5 cm shorter from both ends than kick zone.

Push evenly and remove protecting papers. Check that Tape is fastened well. If loose points push with covering paper and

cork to fasten the tape.

Kilpahiihtäjän voitelu

Alusvoitelu: Start Base klister

Kelivoitelu: Start Special Klister +2...-2C

Pintavoitelu: Start Universal Plus klister +10...+1C and Universal Wide klister +10...-5C

Apply thin layer of Satrt base klister oto the kick zone.

Spread thin layer of Start Special klister onto the base klister.

Add some drops of Strat Universal Plus klister both sides of the center groove onto the kick zone. Do the same with Start

Univesal Wide klister and mix like 1/1 by rubbing with cork or use with hot air gun and thumb.

Let cool well before skiing. If more kick needed add some drops of Universal Plus klister.